RPM 25W Pod Kit by Smok

The Smok RPM 25W is a slimline pod kit designed for MTL (mouth to lung) style vaping, with an output power range of 5W-25W, the internal 900mAh battery is quickly charged via the USB Type-C charging port.

The RPM 25W is compatible with the widely popular LP1 Coils, including the new 0.9Ω MTL Turbo Mesh coil which you will get two of in the box. The new turbo mesh coils feature an innovative wire design for a more stable output and smoother taste.

The included RPM 25W LP1 pods are designed for a leakproof vaping experience achieved by inclusion of three silicone o-rings. The pod holds a standard 2ml of e-liquid, is easy to fill and held in the device by two powerful magnets.

On the front of the device you will find an easy to read 0.69-inch OLED display which will show basic vape information such as remaining battery capacity, output wattage, coils resistance and puff count. The 360° airflow inlet ring can be adjusted to suit your preferred draw and has some resistance so that your setting doesn't get changed by accident.

The RPM 25W has only one button to control the device, quickly click 5 times to power on or off the device, 3 times to enter the power adjustment mode. To activate the device there is no button to press, simply inhale and start vaping.

Which coils are compatible with the RPM 25W?

The RPM 25W kit is compatible with all Smok LP1 coils, including the old favourites; LP1 Mesh and DC MTL 0.8Ω and the all new turbo mesh 0.9Ω coils.

How do you fill the RPM 25W LP1 Pod?

Filling the RPM 25W LP1 Pod is easy, however you must remember not to inhale immediately after filling. You must leave it for several minutes to allow the cotton to saturate, otherwise your coils will become burnt.

1. Remove the pod from the device.
2. Open the slot on the pod by pulling back the rubber plug.
3. Fill with up to 2ml of your chosen e-liquid.
4. Press the rubber bung back in firmly and replace the pod.

Tip: To more easily remove the pod from the device, rotate slightly at the same time as the magnets holding it in place are very strong.

How long does the RPM 25W battery last?

The RPM 25W features an internal 900mAh battery which should last most vapers the whole day, for the size of the device this is a great performer in terms of run time, obviously the higher wattage and more you vape the device, the less time it will last.

What's included in the box?

Included in the box you will find:

• 1x RPM 25W Mod
• 1x RPM 25W Pod (LP1 Meshed 0.9ohm Mesh Coil Preinstalled)
• 1x LP1 Mesh 0.9ohm Coil
• 1x Type-C Cable
• 1x User Manual

Specifications

• Dimensions: 20.5 x 23.2 x 110mm
• Weight: 56g
• Output wattage: 5 - 25W
• Battery: 900mAh
• Input voltage: 3.3 - 4.2V
• Output voltage: 1.5 - 4.0V
• Standby current: <50uA
• Resistance range: 0.6Ω - 2.5Ω
• Charging voltage: 5 ± 0.2V
• Charging current: Max 0.87A
• Overcharge voltage: 4.3 ± 0.05V
• Over-discharge voltage: 2.4 ± 0.0.5V
• Overcharge current: 1.75 ± 0.6A